Digital Ultrasonic Thickness Gauge Meter 0.75-300mm (Depends on Probes)

  

Description

• Suitable for measuring metal (such as steel, cast iron, aluminum, copper, etc.) , plastics, ceramics, glass, fiber glass and any other good ultrasonic conductors;
• Dual straight beam probes with different frequencies and crystal sizes are available;
• Zero calibration, two-point calibration, automatic error correction system;
• EL backlight for easy use in dimly lit environments;
• Remaining battery indicator can display the remaining power in real time;

Specifications

• Measuring Range:0.75-300mm (Depends on probes)
• Working Frequency:(2.5-7）MHZ
• Probe Diameter:Standard N05 is10MM、Probe N07 is 6MM、Probe HT5 is12MM、Probe N02 is12MM. N05 is standard probe, others are optional
• Min. Pipe Diameter:Φ15mm×2.0mm
• Resolution:0.1mm/0.01mm
• Accuracy:±（0.5%Thickness+0.04）mm,depends on probes
• Display:4.5 digits LCD with EL backlight
• Single /Scan Mode:Four measurements readings per second for single point measurement, and ten per second for Scan Mode
• Probe Calibration:Zero Calibration, Two-Point Calibration
• Velocity Range:1000-9999m/s
• Unit:Metric/Imperial unit selectable
• Memory:up to 20 files (up to 99 values for each file) of stored values
• Communication Port:USB
• Data Printing:YES
• Power supply:Two “AA” size, 1.5 Volt alkaline batteries
• Working Hours:100h (EL backlight off).
• Operating Temperature:-20℃-+60℃,Relative Huminity:≤90％